13 min read

Import Data into R - Part 1

Introduction

In this post, we will learn to:

  • read data from flat or delimited files
  • handle column names/header
  • skip text/info present before data
  • specify column/variable types
  • read specific columns/variables

Libraries, Data & Code

We will use the readr package. The data sets can be downloaded from here and the codes from here.

library(readr)

Types of Delimiters

Before we start reading data from files, let us take a quick look at the different types of delimiters we have to deal with while reading or importing data. In general, it is a good practice to take a quick look at as you will clearly know the delimiter used in the file.

Comma Separated Values


Semi Colon Separated Values


Space Separated Values


Tab Separated Values

Read Data

Let us begin by reading data from a csv file using read_csv().

read_csv('hsb2.csv')
## Parsed with column specification:
## cols(
##   id = col_double(),
##   female = col_double(),
##   race = col_double(),
##   ses = col_double(),
##   schtyp = col_double(),
##   prog = col_double(),
##   read = col_double(),
##   write = col_double(),
##   math = col_double(),
##   science = col_double(),
##   socst = col_double()
## )
## # A tibble: 200 x 11
##       id female  race   ses schtyp  prog  read write  math science socst
##    <dbl>  <dbl> <dbl> <dbl>  <dbl> <dbl> <dbl> <dbl> <dbl>   <dbl> <dbl>
##  1    70      0     4     1      1     1    57    52    41      47    57
##  2   121      1     4     2      1     3    68    59    53      63    61
##  3    86      0     4     3      1     1    44    33    54      58    31
##  4   141      0     4     3      1     3    63    44    47      53    56
##  5   172      0     4     2      1     2    47    52    57      53    61
##  6   113      0     4     2      1     2    44    52    51      63    61
##  7    50      0     3     2      1     1    50    59    42      53    61
##  8    11      0     1     2      1     2    34    46    45      39    36
##  9    84      0     4     2      1     1    63    57    54      58    51
## 10    48      0     3     2      1     2    57    55    52      50    51
## # ... with 190 more rows

Great! If you see the above output, you have successfully read data into R. If you see an error message (which most of us see when we are trying to read data for the first time), follow the below instructions:

  • check the separator in the file and ensure it is a comma
  • check the file name
  • check the file path i.e. location of the file
  • ensure that the file name or path is enclosed in single or double quotes

When you read data using readr, it will display the data type detected for each column/variable in the data set. If you want to check the data types before reading the data, use spec_csv(). We will learn to specify the column types in the next section.

spec_csv('hsb2.csv')
## cols(
##   id = col_double(),
##   female = col_double(),
##   race = col_double(),
##   ses = col_double(),
##   schtyp = col_double(),
##   prog = col_double(),
##   read = col_double(),
##   write = col_double(),
##   math = col_double(),
##   science = col_double(),
##   socst = col_double()
## )

Column Names

In some cases, files do not include column names or headers. If we do not indicate the absence of column names, readr will treat the first row from the data as the column name. Like we said before, it is a good practice to take a quick look at the data to check for the presence/absence of column names.



We will first read the data set without indicating the presence or absence of column names.

read_csv('hsb3.csv')
## Warning: Duplicated column names deduplicated: '1' => '1_1' [5], '1' =>
## '1_2' [6], '57' => '57_1' [11]
## # A tibble: 199 x 11
##     `70`   `0`   `4`   `1` `1_1` `1_2`  `57`  `52`  `41`  `47` `57_1`
##    <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>  <dbl>
##  1   121     1     4     2     1     3    68    59    53    63     61
##  2    86     0     4     3     1     1    44    33    54    58     31
##  3   141     0     4     3     1     3    63    44    47    53     56
##  4   172     0     4     2     1     2    47    52    57    53     61
##  5   113     0     4     2     1     2    44    52    51    63     61
##  6    50     0     3     2     1     1    50    59    42    53     61
##  7    11     0     1     2     1     2    34    46    45    39     36
##  8    84     0     4     2     1     1    63    57    54    58     51
##  9    48     0     3     2     1     2    57    55    52    50     51
## 10    75     0     4     2     1     3    60    46    51    53     61
## # ... with 189 more rows

As you can see, in the absence of column names, readr has converted the first row of the data into the column names. As a result, the data is not read properly and there are lots of missing values and warnings. If the column names are absent (i.e. the column names are provided in a separate file), use the col_names argument and set it to FALSE. Now readr will not convert the first row of data into column name and instead it will generate new column names.

read_csv('hsb3.csv', col_names = FALSE)
## # A tibble: 200 x 11
##       X1    X2    X3    X4    X5    X6    X7    X8    X9   X10   X11
##    <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>
##  1    70     0     4     1     1     1    57    52    41    47    57
##  2   121     1     4     2     1     3    68    59    53    63    61
##  3    86     0     4     3     1     1    44    33    54    58    31
##  4   141     0     4     3     1     3    63    44    47    53    56
##  5   172     0     4     2     1     2    47    52    57    53    61
##  6   113     0     4     2     1     2    44    52    51    63    61
##  7    50     0     3     2     1     1    50    59    42    53    61
##  8    11     0     1     2     1     2    34    46    45    39    36
##  9    84     0     4     2     1     1    63    57    54    58    51
## 10    48     0     3     2     1     2    57    55    52    50    51
## # ... with 190 more rows

We may not always want to use the column names generated by readr and instead specify new column names. In such cases, we can use col_names to supply column names as shown in the below example. Let us reread hsb3 and specify column names.

cnames <- c("id", "gender", "race", "socio_economic_status", "school_type", "program", "read", "write", "math", "science", "socst")
read_csv('hsb3.csv', col_names = cnames)
## # A tibble: 200 x 11
##       id gender  race socio_economic_~ school_type program  read write  math
##    <dbl>  <dbl> <dbl>            <dbl>       <dbl>   <dbl> <dbl> <dbl> <dbl>
##  1    70      0     4                1           1       1    57    52    41
##  2   121      1     4                2           1       3    68    59    53
##  3    86      0     4                3           1       1    44    33    54
##  4   141      0     4                3           1       3    63    44    47
##  5   172      0     4                2           1       2    47    52    57
##  6   113      0     4                2           1       2    44    52    51
##  7    50      0     3                2           1       1    50    59    42
##  8    11      0     1                2           1       2    34    46    45
##  9    84      0     4                2           1       1    63    57    54
## 10    48      0     3                2           1       2    57    55    52
## # ... with 190 more rows, and 2 more variables: science <dbl>, socst <dbl>

Skip Lines

In certain files, you will find information related to the data such as:

  • the data source
  • column names
  • column description
  • copyright etc.

The data will appear after/below such text/information. While reading data from such files, we need to skip all the rows where the text is present. If we do not skip them, readr will consider them as part of the data.


Let us read the data without skipping any lines/rows and observe the result.

read_csv('hsb4.csv')
## Warning: 201 parsing failures.
## row col  expected     actual       file
##   3  -- 1 columns 11 columns 'hsb4.csv'
##   4  -- 1 columns 11 columns 'hsb4.csv'
##   5  -- 1 columns 11 columns 'hsb4.csv'
##   6  -- 1 columns 11 columns 'hsb4.csv'
##   7  -- 1 columns 11 columns 'hsb4.csv'
## ... ... ......... .......... ..........
## See problems(...) for more details.
## # A tibble: 203 x 1
##    `# A dataset containing demographic information and standardized`
##    <chr>                                                            
##  1 # test scores of high school students.                           
##  2 # http://www.ats.ucla.edu/stat/spss/whatstat/whatstat.htm        
##  3 id                                                               
##  4 70                                                               
##  5 121                                                              
##  6 86                                                               
##  7 141                                                              
##  8 172                                                              
##  9 113                                                              
## 10 50                                                               
## # ... with 193 more rows

Use skip argument to indicate the number of lines/rows to be skipped while reading data from a file. For example, if the file has contents other than data in the first few lines, we need to skip them before reading the data. In the below example, we will skip the first 3 lines as they contain information about the data set which we do not need.

read_csv('hsb4.csv', skip = 3)
## # A tibble: 200 x 11
##       id female  race   ses schtyp  prog  read write  math science socst
##    <dbl>  <dbl> <dbl> <dbl>  <dbl> <dbl> <dbl> <dbl> <dbl>   <dbl> <dbl>
##  1    70      0     4     1      1     1    57    52    41      47    57
##  2   121      1     4     2      1     3    68    59    53      63    61
##  3    86      0     4     3      1     1    44    33    54      58    31
##  4   141      0     4     3      1     3    63    44    47      53    56
##  5   172      0     4     2      1     2    47    52    57      53    61
##  6   113      0     4     2      1     2    44    52    51      63    61
##  7    50      0     3     2      1     1    50    59    42      53    61
##  8    11      0     1     2      1     2    34    46    45      39    36
##  9    84      0     4     2      1     1    63    57    54      58    51
## 10    48      0     3     2      1     2    57    55    52      50    51
## # ... with 190 more rows

Maximum Lines

Suppose the data file contains several thousands of rows of data and we do not want to read all of it. What can we do in such cases? readr allows us to specify the maximum number of rows to be read using the n_max argument. Suppose we want to read only 100 rows of data from a file, we can set n_max equal to 100. In the next example, we will read the first 120 rows from the hsb2 file. If you observe the last row in the output, it says # ... with 110 more rows, indicating that only 120 rows of data has been read from the file.

read_csv('hsb2.csv', n_max = 120)
## # A tibble: 120 x 11
##       id female  race   ses schtyp  prog  read write  math science socst
##    <dbl>  <dbl> <dbl> <dbl>  <dbl> <dbl> <dbl> <dbl> <dbl>   <dbl> <dbl>
##  1    70      0     4     1      1     1    57    52    41      47    57
##  2   121      1     4     2      1     3    68    59    53      63    61
##  3    86      0     4     3      1     1    44    33    54      58    31
##  4   141      0     4     3      1     3    63    44    47      53    56
##  5   172      0     4     2      1     2    47    52    57      53    61
##  6   113      0     4     2      1     2    44    52    51      63    61
##  7    50      0     3     2      1     1    50    59    42      53    61
##  8    11      0     1     2      1     2    34    46    45      39    36
##  9    84      0     4     2      1     1    63    57    54      58    51
## 10    48      0     3     2      1     2    57    55    52      50    51
## # ... with 110 more rows

Column Types

If you have observed carefully, when you read data using readr, it displays the column names and column types followed by the first 10 rows of data. readr determines the data type for each column based on the first 1000 rows of data. The data can be of the following types:

  • integer
  • double (decimal point)
  • logical (TRUE/FALSE)
  • character (text/string)
  • factor (categorical/qualitative)
  • date/time


Before you read data from a file, use spec_csv() to see the data types as determined by readr. If it determines the data types correctly, you can go ahead and read the data else we will have to specify the data types and we will have to do that for all the columns we want to read and not just for those columns whose data type was wrongly determined by readr.

To specify the data types, we will use the col_types argument and supply it a list of data types. The data types can be specified using:

  • col_integer()
  • col_double()
  • col_factor()
  • col_logical()
  • col_character()
  • col_date()
  • col_time()
  • col_datetime()

While specifying the data types we also need to specify the categories of the categorical/qualitative variable. To do that, we use the levels argument within col_factor(). Let us read data from the hsb2.csv file to understand data type specification.

read_csv('hsb2.csv', col_types = list(
  col_integer(), col_factor(levels = c(0, 1)), 
  col_factor(levels = c(1, 2, 3, 4)), col_factor(levels = c(1, 2, 3)), 
  col_factor(levels = c(1, 2)), col_factor(levels = c(1, 2, 3)),
  col_integer(), col_integer(), col_integer(), col_integer(),
  col_integer())            
)
## # A tibble: 200 x 11
##       id female race  ses   schtyp prog   read write  math science socst
##    <int> <fct>  <fct> <fct> <fct>  <fct> <int> <int> <int>   <int> <int>
##  1    70 0      4     1     1      1        57    52    41      47    57
##  2   121 1      4     2     1      3        68    59    53      63    61
##  3    86 0      4     3     1      1        44    33    54      58    31
##  4   141 0      4     3     1      3        63    44    47      53    56
##  5   172 0      4     2     1      2        47    52    57      53    61
##  6   113 0      4     2     1      2        44    52    51      63    61
##  7    50 0      3     2     1      1        50    59    42      53    61
##  8    11 0      1     2     1      2        34    46    45      39    36
##  9    84 0      4     2     1      1        63    57    54      58    51
## 10    48 0      3     2     1      2        57    55    52      50    51
## # ... with 190 more rows

If we do not specify the data type for all columns, readr will return an error which leads to the following questions:

  1. What if I want to skip a few columns?
  2. What if I want to read certain columns only?

Specific Columns


For the first scenario, we can use col_skip() i.e. instead of specifying the data type, we indicate to readr to skip that particular column while reading the data.

In case of the second scenario, we will use cols_only() to specify the columns to be read i.e. instead of using list() to supply the data types, we will use cols_only() and provide the following details:

  • column name
  • column type using col_types argument
read_csv('hsb2.csv', col_types = cols_only(id = col_integer(),
  prog = col_factor(levels = c(1, 2, 3)), read = col_integer())
)
## # A tibble: 200 x 3
##       id prog   read
##    <int> <fct> <int>
##  1    70 1        57
##  2   121 3        68
##  3    86 1        44
##  4   141 3        63
##  5   172 2        47
##  6   113 2        44
##  7    50 1        50
##  8    11 2        34
##  9    84 1        63
## 10    48 2        57
## # ... with 190 more rows

If you have a data set with 10 columns and plan to skip only a couple of columns, use col_skip() instead if you plan to read only a couple of columns, use cols_only().

Summary

Summary

In this post, we explored:

  • reading data from flat/delimited files
  • indicating the presence/absence of column names
  • skipping rows in the presence of text/information
  • specifying maximum rows to be read
  • specifying column data types
  • skipping columns
  • reading specific columns only

In the next post, we will explore reading data from excel spreadsheets and other statistical softwares.